Rack Equipment Setup

This information applies to all 19" rackmount equipment.  If you require specific guidance please see the User Manuals at the bottom of this page.

STEP 1:

To the right of the AC IEC input you will see a red slide switch. The switch has 2 options 110/220. You MUST ENSURE that the switch is in the correct position for your country (North America is set to 110, Europe/Australia will set 220). If you are unsure, please reach out at jeff@607audio.com and we will make sure you have selected the correct position for your country's line voltage. This will ensure the power transformers input windings are seeing the correct voltage to provide the correct output voltages for the power supply. Incorrect assignment of this switch will damage the power-supply and could damage other components in your device.

ONCE YOU HAVE DETERMINED YOUR UNIT IS CONFIGURED FOR THE CORRECT AC LINE VOLTAGE, CONTINUE:

STEP 2:

Attach the included IEC cord to the rear of the unit plug it into the wall.  

STEP 3:

Connect the audio cables to the rear of the device

STEP 4:

Power on the device and enjoy.